Understanding should be taken before cutting can avoid processing failure

Understanding should be taken before cutting can avoid processing failure. Laser cutting machine of new type of lightweight reinforced polymer composites is difficult to conventional methods for processing. The advantage of the characteristics of non-contact laser cutting processing can be overlapping layers of the solidification front chip high-speed cutting trim, scale, under the laser beam heating, the edge of the wafer, avoid the fiber dust generation. To completely cured artifacts, boron fiber and carbon fiber composite materials, in particular, should pay attention to prevent trimming when laser cutting carbide, layering, and thermal damage could happen. Just as plastic cutting, synthetic materials need to promptly eliminate waste gas in the process of cutting. There is also a type of composite material, is pure by the performance of two kinds of different materials and composite together, in order to get the better cutting quality, the principle of laser cutting machine is first cutting cutting property has a good side. The virtuous circle of the laser cutting machine in cutting process. 6 um wavelength of CO2 laser beam easily absorbed by the non-metallic materials, thermal conductivity and the low evaporation temperature and absorption beam almost the entire input material inside, and in the light irradiation instant vaporization, and eventually formed the initial hole. Available for laser cutting machine processing of organic materials include: plastic ( Polymers). , rubber, wood, paper products, leather and so on. And can use laser cutting machine processing of inorganic materials include: quartz, glass, ceramic, stone, etc.