Studious, CNC CNC engraving machine training - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

the first thing you need to know first what to learn, use of choose and buy a CNC CNC engraving machine mainly need to master two large, one is a control program, and a figure is to use professional drawing software.





control program is not difficult to learn this, mainly they will be use d macro control card can ( The current common carving machine is match d macro system) 。













the following is the sculpture design drawing software, this need to spend some time, such as us, we teachers will teach you how to design software ( Commonly used there are carved, artcam, mach3, etc. ) , carved software if all learn all of the functions and operations need to spend a lot of time, but you are engaged in a business, then our teacher will teach you need to master operating in the industry, such as relief, then specifically teach you relief, let you can quickly start to design, processing products.











if you still want to learn more, of course, the design of the software operation, so as long as you are patient, are all can teach you one by one, in general, have certain computer foundation - 3 4 days, can master basic processing knowledge you need. If without the basis of computer a week can also master the basic, these also need to your own practice, can finally practice makes perfect.









d macro system ( NcStudio) The operation steps of





1, the boot reset


2, unload and load carving file


3, simulation, and cancel the simulation


4, set processing origin


5, slow down, opening and adjusting the spindle speed, start processing


6, adjust processing speed


7, is processed





carved carving machine control system operation steps





1, back to the mechanical origin ( In the task bar to mechanical origin of the operation)


2, define the origin carving ( X Y zero)


3, the knife ( The Z axis zero)


4, open and loading ( Call out to engraving files)


5, simulation ( Simulation)


6, adjust feed rate ( Engraving speed) And regulation of spindle speed, Engraving speed)


7, began carving





do all kinds of carving software path choice of the cutting tool





1, the cutting path: generally choose straight knife, the cutting depth of the deeper the choice of the cutter diameter straight knife, the greater the material choice of the cutter diameter, the hard and soft straight knife, the greater the choice of the knife to cut through the greater the graphic size, the greater the straight knife.













engraving machine control system note





1, in the engraving machine and software did not shut down, the thickness of the material unchanged under the condition of invariable, tool does not need the knife again.


2, such as remounted tool will anew to carving knife to.


3, not closing in the engraving machine and software, and materials without moving, layout of the page without modification, carved layout is the same - a case does not need to redefine the origin carving.


4, in the same page as long as is made of the same kind of cutting tool path can be output with sculpture.


5, usually carved inside before tuning out, after the first small carvings of large, after carving carving had no sense of carving carving.