Stone engraving machine processing stone head hot treatment method
The material processed by the stone engraving machine is hard. Some customers will encounter the situation that the head of the stone engraving machine is hot. How to deal with this hot situation? The engraving machine manufacturer has compiled several suggestions, friends can refer to, first of all, we must ensure the working time and rest time of the machine, reasonable allocation of time to work, can extend the life of stone engraving machine accessories or equipment.
It is best to let the machine rest for 30 minutes every 3 hours or more, so as to achieve better cooling effect.
What if the head of the stone engraving machine is hot, and if the power supply current is too high, it will cause the head to heat up. At this time, you can install a voltage stabilizer.
In addition, the water tank flow circulation system is not smooth is also one of the causes of fever, we need to clean up in time.
Also, the environment will cause this kind of failure, so you need to test how high the temperature in your room is. If the temperature is too high, it may cause the spindle temperature to be too high, at this time, you need to install more fans to dissipate heat.