Solid stone carving machine to choose three elements of cutting fluid

Solid stone carving machine to choose cutting fluid of three elements: 1, stainless steel. In such material engraving machine, can use plant oil or special stainless steel cutting oil for cooling and lubrication. 2, cast copper, copper, aluminum and other non-ferrous metals. Sculpture, this kind of materials can be used 5 - 7 oil for cooling, lubrication, also can choose non-ferrous metal cutting oil. 3, steel, iron and other ferrous metal materials. Carved on such materials, saponification liquid can be used for cooling and lubrication, can also use 5 - 7 the oil. Solid stone carving machine: why do you want to use cutting fluid? 1, assist the chip removal in the process of CNC engraving machine, pouring cutting fluid, can wash away the cutting process of scraps, prevent secondary cutting, affect the machining surface. 2, lubrication cutting fluid osmosis to travel between cutter and cutting, surface lubrication film, have the effect of lubrication. But because of when the cutting between the surface with high pressure, and the temperature is very high, the effect of lubrication also when using and the specific situation. In solid stone carving machining, the most commonly used cutting fluid is 5 - 7 the oil. 3, cooling cutting fluid pouring in cutting area, cutting through the heat conduction, convection and evaporation of cutting fluid, can take away the heat on the workpiece and tool, have the effect of cooling. The three-dimensional cutting fluid used in stone carving machine five note 1, it is prohibited to use kerosene cooling, corrosion caused by the kerosene easy line for machine tools, will affect the normal use of later, even affect the service life of machine tool. 2, don't choose too sticky oil, oil are not clear, affects a carving machining of cutting tool to cool. 3, when cutting tool out length shorter or processing is strong, can adopt intermittent gas method. 4, when using the cutting fluid should pay attention to adjust the size of the oil, don't splashing oil mist. 5, cutting fluid to pouring in cutting area, namely the impact on the cutting tool, and in the position of cutting out the material, the best cooling effect. That is about the three-dimensional cutting fluid used in stone carving machine knowledge, if there are any questions or different opinions, welcome consulting carving factory, we will answer for you!