Operating woodworking CNC engraving machine must be cautious

By the host saw woodworking CNC engraving machine, aluminum molding machine body, move the arm, a fixed scale of the event, auxiliary table and electrical control box parts, also with the installation of vertical milling machine. Woodworking CNC engraving machine are two of the horizontal and vertical, horizontal woodworking CNC engraving machine is divided into hand push woodworking CNC engraving machine and reciprocating saw woodworking CNC engraving machine two hands push woodworking CNC engraving machine generally do not adjust the cutting Angle, hand from woodworking CNC engraving machine end push forward moving plate cutting table. Woodworking CNC engraving machine adjustable Angle is 90 °, 45 ° two horns, by the Lord saw mobile Angle cutting Angle. Double saw woodworking CNC engraving machine with auto pressing unit and auxiliary feed support, through the reciprocating movement to complete the cutting electric control. Operation must be carefully woodworking CNC engraving machine, woodworking CNC engraving machine mechanical vertical erection, through woodworking CNC engraving machine horizontal move up and down or back and forth motion, can reduce the woodworking CNC engraving machine takes up the work area, but the height of the factory must pay attention to. Operation must be carefully woodworking CNC engraving machine 1. In woodworking CNC engraving machine start cutting board, the saw blade must be carefully checked and press the nut and screw down the screws, if found loose phenomenon should be tightened. Installing a saw blade, must pay attention to the cutting direction, is irreversible. 2. Woodworking CNC engraving machine without protective cover, precision panel saw is not allowed to work. 3. Precise driving panel saw manual feed, be sure to put the table on the table, put the wood on the table, hand can't be too close to the saw blade, woodworking CNC engraving machine should strictly cannot control timber processing. 5. Should first check whether wood in front of the timber processing in nails, gravel, festivals such as saws, to prevent accidents damage the blade cuts. 6. Woodworking CNC engraving machine cutting direction can't stand, the operator should pay attention to the safety of the wood. 7. In clean woodworking CNC engraving machine, please wipe the grease and remove the saw blade and remove the sawdust, must be closed woodworking CNC engraving machine's power. 8. When precision cutting board failure, shall be immediately cut off the power of the woodworking CNC engraving machine, stop the operation, repair by staff adjustment, failure is not permitted in woodworking CNC engraving machine operation.