Mistakes that cannot be made when using advertising engraving machine

Although the use of the advertising engraving machine is not very complicated, if there are some minor errors in the use process, it will also have a serious impact, therefore, I hope everyone will not ignore the correct operation method in the process of using it at ordinary times. So what contents must be paid attention? Advertising engraving machine is more and more widely used because of its excellent quality. In the process of operation and use of advertising engraving machine, we need to use it correctly. Today, we introduce some taboos of using advertising engraving machine: first point: it is strictly prohibited to use a power supply that does not meet the rated voltage. The second point: most of the advertising engraving machines are made of metal, so we must not place the advertising engraving machines in a humid environment, which is very corrosive to the advertising engraving machines. The third point: if there is odor or noise and smoke in the process of using the advertising engraving machine, it is necessary to immediately stop using the advertising engraving machine and conduct a detailed inspection of the advertising engraving machine. The fourth point: it is strictly prohibited to install and debug the advertising engraving machine in thunder or rainy weather. The fifth point: it is strictly forbidden to replace or destroy the original accessories and cables of the advertising engraving machine when using the advertising engraving machine. Original accessories are configured according to the corresponding advertising engraving machine needs, if the replacement, there may be unnecessary damage or accidents. These are all parts that we cannot ignore in the process of using the advertising engraving machine. I believe everyone knows how to use it correctly after reading it.