Metal laser cutting machine processing error caused by factors related to

Metal laser cutting machine processing error caused by factors related to 1. Cutting material thickness. General metal laser cutting function is below the thickness of cutting plate thickness in 12, the thinner plates, cutting up more easily, the quality is, the better. If the plate is too thick, laser cutting machine for cutting hard, in guarantee under the condition of cutting, the machining accuracy can appear error, so to determine the thickness of the plank. 2. The laser power output is not up to standard. At the time of metal laser cutting machine running and debugging, to ensure that the laser output power up to standard, generally the higher the output power of the laser, in the same thickness of plate, the better cutting quality. 3. The roughness of the cutting board. Under normal circumstances, the cutting material surface more smooth, cutting quality is, the better, research and development of wuhan high energy laser automatically adjust the height of the system, can be adjusted according to the different thickness of the material. 4. The focus position is not accurate. Aim the focus of the laser cutting machine, if not, directly affect the cutting precision, so to the calibration check before operation. 5. Processing speed. Cutting speed directly affect the machining accuracy. So also want before running, cutting speed and alignment to achieve good material.