Influence of environment on stone engraving machine

Environmental factors affecting stone engraving machine carving include power supply, vibration, ambient temperature and humidity, dust, lightning and so on. The influence of power supply on processing is the most direct, mainly manifested in the disorder of control system. Each electronic device and each functional component of the stone engraving machine control system has a certain voltage and frequency range. Overload operation of any component will inevitably lead to instability of the whole system, and the most common phenomenon is processing deviation. The influence of vibration is reflected in frequent cutter breakage and unsmooth surface. Common reasons are touching the machine tool during processing, unqualified installation level of the machine tool, and punching machines around. Ambient temperature and humidity mainly affect the performance of the control system and the performance of the drive motor. When the ambient temperature is too high, the control system may have wrong control, and the driving torque of the driving motor may not reach the rated value. Dust is a major killer of electronic components, mainly affecting the heat dissipation of electronic components and the sensitivity of photosensitive components. Common phenomena include optical inspection failure, computer CPU fan does not turn, etc. Therefore, it is necessary to regularly clean up the dust inside the computer and control the electric box to ensure the normal work of the stone engraving machine.