Jinan Transon CNC Equipment Co., Ltd.
S I N C E 2 0 1 0
Latest products
In the process of laser cutting machine cutting suddenly broken wires
by：Transon
2020-10-28
In the process of laser cutting machine for cutting the reason suddenly broken wires
( 1) Choose the improper electrical parameters, current is too large;
( 2) Feed improper adjustment, fast and slow, open circuit frequently;
( 3) Laser cutting machine working liquid use undeserved, Such as error using ordinary machine tool emulsion) , emulsion is too thin, with long time, too dirty;
( 4) Blockage, working liquid flow out;
( 5) Conductive block failed to contact with molybdenum wire or has been molybdenum wire pull dent, cause poor contact;
( 6) When cutting thick pieces, small batch or use is not suitable for cutting thick pieces of working fluid;
( 7) Laser cutting machine pulse power clipping diodes performance, processing of negative wave is bigger, the molybdenum wire in a short period of time loss increase;
( 8) Molybdenum wire of poor quality or improper safekeeping, oxidation, or on the silk with a small iron bar inappropriate tools such as silk, silk produce damage;
( 9) Storage drum speed too slow, molybdenum wire in the workspace for a long time;
( 10) When cutting the work piece to incorrect molybdenum wire diameter
( 1) Choose the improper electrical parameters, current is too large;
( 2) Feed improper adjustment, fast and slow, open circuit frequently;
( 3) Laser cutting machine working liquid use undeserved, Such as error using ordinary machine tool emulsion) , emulsion is too thin, with long time, too dirty;
( 4) Blockage, working liquid flow out;
( 5) Conductive block failed to contact with molybdenum wire or has been molybdenum wire pull dent, cause poor contact;
( 6) When cutting thick pieces, small batch or use is not suitable for cutting thick pieces of working fluid;
( 7) Laser cutting machine pulse power clipping diodes performance, processing of negative wave is bigger, the molybdenum wire in a short period of time loss increase;
( 8) Molybdenum wire of poor quality or improper safekeeping, oxidation, or on the silk with a small iron bar inappropriate tools such as silk, silk produce damage;
( 9) Storage drum speed too slow, molybdenum wire in the workspace for a long time;
( 10) When cutting the work piece to incorrect molybdenum wire diameter
Custom message
