Jinan Transon CNC Equipment Co., Ltd.
S I N C E 2 0 1 0
Latest products
Improve the woodworking engraving machine working life guide
by：Transon
2020-11-01
At work in my spare time, we will always maintain woodworking engraving machine, so as to prolong the life of woodworking engraving machine.
And the day after the use, to clean up the table in time the rest of the material, but also on the guide rail spray lubricating oil regularly.
Each class to replace the cooling water, mirror always clean.
And software maintenance regularly upgrade system, as well as killing viruses and upgrade anti-virus software regularly.
Left is woodworking engraving machine work environment, don't in the environment of the humidity is bigger, and is not in a strong electromagnetic environment.
is a woodworking engraving machine cleaning:
1, the work is done at a time should be timely clean up the table, provide convenience for the next work.
2 chip, clear guide rail and guide on the side of the material, in order to prevent the machine caused by debris interference, a lag in the process of work.
3, regular cleaning screw, with foreign body to prevent the screw, screw in the equipment is very important, it determines the precision of the machine.
4, regular cleaning engineering control box, dust is the biggest killer of circuit board.
second, woodworking carving machine oil:
1, first clean guide rail and ball screw, not depilate cloth are available to guide and lead screw grease and material on the crumbs. Because the temperature is low, can add oil all the guide rail and ball screw, best antifreeze oil.
2, refueling cycle for twice a month, or every two weeks to add oil at a time.
3, if not for a long time, machine should be lubricated periodically empty, to ensure the flexibility of the transmission system.
4, after a slow walk, ensure uniform lubricating oil to add to the guide rail and ball screw.
3 is woodworking engraving machine working environment temperature:
1, ensure preparation temperature, best at room temperature.
2, check the gas standard applicable temperature, at least the minimum temperature.
3, the machine need not when, if the room temperature low best poured out the water in the tank, to prevent the frost crack water tank and the water pipe.
4 it is the use of woodworking engraving machine cooling water
1, the cooling water is necessary for the normal work of the spindle motor, if the water too dirty can cause serious damage to the motor, so make sure the cooling water clean, ensure the normal work of the pump.
2, pay attention to the water level, must not water shortage phenomenon in a water-cooled spindle motor, which motor heat cannot be derived in a timely manner.
3, pay attention to the environmental temperature, be careful the water tank and conduit frost crack caused by the water temperature is too cold.
4, conditional can use antifreeze liquid cooling.
is a woodworking engraving machine cleaning:
1, the work is done at a time should be timely clean up the table, provide convenience for the next work.
2 chip, clear guide rail and guide on the side of the material, in order to prevent the machine caused by debris interference, a lag in the process of work.
3, regular cleaning screw, with foreign body to prevent the screw, screw in the equipment is very important, it determines the precision of the machine.
4, regular cleaning engineering control box, dust is the biggest killer of circuit board.
second, woodworking carving machine oil:
1, first clean guide rail and ball screw, not depilate cloth are available to guide and lead screw grease and material on the crumbs. Because the temperature is low, can add oil all the guide rail and ball screw, best antifreeze oil.
2, refueling cycle for twice a month, or every two weeks to add oil at a time.
3, if not for a long time, machine should be lubricated periodically empty, to ensure the flexibility of the transmission system.
4, after a slow walk, ensure uniform lubricating oil to add to the guide rail and ball screw.
3 is woodworking engraving machine working environment temperature:
1, ensure preparation temperature, best at room temperature.
2, check the gas standard applicable temperature, at least the minimum temperature.
3, the machine need not when, if the room temperature low best poured out the water in the tank, to prevent the frost crack water tank and the water pipe.
4 it is the use of woodworking engraving machine cooling water
1, the cooling water is necessary for the normal work of the spindle motor, if the water too dirty can cause serious damage to the motor, so make sure the cooling water clean, ensure the normal work of the pump.
2, pay attention to the water level, must not water shortage phenomenon in a water-cooled spindle motor, which motor heat cannot be derived in a timely manner.
3, pay attention to the environmental temperature, be careful the water tank and conduit frost crack caused by the water temperature is too cold.
4, conditional can use antifreeze liquid cooling.
Custom message
