Jinan Transon CNC Equipment Co., Ltd.
S I N C E 2 0 1 0
Latest products
Ensure the safety of laser cutting machine key points
by：Transon
2020-10-30
Ensure the safety of laser cutting machine key points
1. Fire
often need to use when laser cutting machine for cutting the oxygen auxiliary cutting, smoking should be banned in cutting machine area, especially near the oxygen tank, to prevent unnecessary damage brings hidden trouble.
2. Dimming
in the center of the play, it is important to note that to ensure that the hand of the first off and then polishing; Outside the adjustment scope of light path must ensure the light path when don't stand a person, take care to ensure that operators dimming light won't hit people to lighting, lighting power and time should be controlled to a reasonable range ( Call center power generally between 50-100 w, the light time control at zero. 1 to 0. 3 s between; Outside the light path when the optical power control between 100 and 300 w, the light time control at zero. 3 to 0. Between 5 s) Outside, adjust the light path must put all shield first and then to cut. Take a breath when removing the high voltage first, after changing the gas immediately closed mixed gas cylinders and laser door, laser don't open the door tothe electric cabinet, do not use hand touch the inside of the circuits and electronic components at will.
3. Change table
try not to use automatic exchange, exchange to ensure that people don't stand in there, the cutting head has raised, if encounter any emergency of exchange process immediately stop exchange or off scram
1. Fire
often need to use when laser cutting machine for cutting the oxygen auxiliary cutting, smoking should be banned in cutting machine area, especially near the oxygen tank, to prevent unnecessary damage brings hidden trouble.
2. Dimming
in the center of the play, it is important to note that to ensure that the hand of the first off and then polishing; Outside the adjustment scope of light path must ensure the light path when don't stand a person, take care to ensure that operators dimming light won't hit people to lighting, lighting power and time should be controlled to a reasonable range ( Call center power generally between 50-100 w, the light time control at zero. 1 to 0. 3 s between; Outside the light path when the optical power control between 100 and 300 w, the light time control at zero. 3 to 0. Between 5 s) Outside, adjust the light path must put all shield first and then to cut. Take a breath when removing the high voltage first, after changing the gas immediately closed mixed gas cylinders and laser door, laser don't open the door tothe electric cabinet, do not use hand touch the inside of the circuits and electronic components at will.
3. Change table
try not to use automatic exchange, exchange to ensure that people don't stand in there, the cutting head has raised, if encounter any emergency of exchange process immediately stop exchange or off scram
Custom message
