Engraving machine spindle choose water-cooled or air-cooled good?

Many customers are buying engraving machine spindle will face such a problem, when carving machine spindle choose water-cooled or air-cooled good? Aiming at this problem, jinan - carving factory house CNC, list the engraving machine for everybody and air-cooled water-cooled spindle motor spindle motor has the following main difference: 1, the cooling way: water-cooled spindle motor USES water to cool the spindle after the heat generated by the high speed rotation, this way the effect will be very good, because after circulation temperature does not exceed 40 degrees. Air cooling spindle motor fan way is used to heat dissipation, its effect is better than water. 2, noise: water-cooled spindle motor has virtually no noise, but the air cooling spindle motor is very loud. 3, the service life: because water-cooled spindle motor should pay attention to maintenance, often in water or industrial water cooling machine, so its service life is much longer than air cooling spindle motor. 4, the precision: water-cooled spindle motor with axial and radial runout is essentially at zero. Below 003 mm, this is air cooling spindle motor ( Domestic) Far less! 5, easy to use: with the need of water cooling spindle pumps, water, so you need a bucket needs to connect a drain, especially cold winter in the north are more likely to freeze, some customers may feel more troublesome. And the use of air cooling spindle wouldn't have so many problems. Engraving machine spindle choose water-cooled or air-cooled good? High quality engraving machine usually equipped with a high performance spindle, can play his role. As to choose the water-cooled or air-cooled, need to decide according to the actual demand, comparing the difference between the two, choose one of the most suitable for your business. Believe that the above content in carving of choose and buy when everyone will have certain help.