Engraving machine of two-dimensional and three-dimensional sculpture is introduced - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

in the process of the use of engraving machine, often used two-dimensional and three-dimensional sculpture, part of the customer for 2 d and 3 d engraving all don't understand, so this engraving machine under specific to share.

what is a two-dimensional sculpture





2 d carving carving depth is fixed, which is based on the design of carving depth, from surface milling, eventually achieve the design ideal effect.





2 d carving carving mode has





, the bottom of the vertical milling, horizontal milling bottom is 45 degrees, reverse 45 degrees of milling and milling bottom bottom, the bottom of the hook side, circular milling, two-dimensional way, also has a secondary process in the common ways are: horizontal milling bottom, the bottom of the vertical milling, is 45 degrees of end milling, end of reverse milling 45 degrees, the edge, the bottom of the circular milling. Two-dimensional sculpture can be used to make the hook side, milling bottom, badges, etc.





what is a three-dimensional carving





refers to according to different graphics and cutting tools, the system automatically changes the depth of engraving, to ensure that the sculpture surface consistent with design objects. Commonly known as the 'three dimensional Angle' function.





if only single three-dimensional carving path processing, parts may be processing less than, can produce a so-called 'isolated island', wen tai software handling of island provides two kinds of processing methods: island processing and continuous way.





island, is said to the regions that raw to adopt the way of the bottom of the milling process. To remove the bottom of the milling, should define its percentage 'overlap'.





pick angular distance, is a three dimensional Angle of processing parameters. When processing large objects or use coarser tool, carry angular distance can increase accordingly. Usually, it is recommended to use the default value of 0. 1 mm. Choose angular distance is too small, may make pick Angle too many, the actual processing.