Effect of the laser cutting machine for cutting the judgment factors

Effect of the laser cutting machine for cutting the judgment factors, 1) Roughness of cutting edge more or less have some left by cutting the grain, but it happens that the depth of these lines is the key factors of cutting surface roughness. （ 2) Perpendicularity due to the light beam is by focusing on cutting the come of, and the beam with the particularity of divergence, so would make it caused some flare when cutting the size of the inconsistencies, also caused the cutting plate surface and the surface can't reach an absolute 90 °, or on the surface is wide or surface is wide. （ 3) Excellent cutting burr, cutting edge should be no burr, if there is a burr you will need to subsequent processing. The machining process and the specific type of parameters matching, material, process and the quality of the beam are related. （ 4) The deformation due to laser cutting is the essence of thermal cutting, so the deformation of the plate is inevitable excellent cutting should be as much as possible to reduce the negative influence of it. Special attention should be paid to the sheet cutting. But in general, the faster cutting speed, cutting the more narrow, if the gas flow rate, the greater the so the smaller the deformation also would have been.