Cutting machine control system causes of failure

In the use of cutting machine this kind of equipment, mechanical pressure, will meet the slider insufficient clamping force and the return speed is slow, this is what reason is caused? According to the laser system diagram and working process of the analysis, which leads to the cutting machine pressure slider insufficient clamping force and return the cause of the slow may have the following case, ( 1) Cutting machine piston and end cover sealing is not good, cutting machine cause cylinder inside and outside leakage. （ 2) 14 adjustable overflow valve pressure is insufficient. （ 3) 12 valve cone valve core is worn surface, the valve orifice closed lax. （ 4) 9 overflow valve setting pressure is low. （ 5) Excessive discharge in laser pump pump pressure is low. （ 6) Directional valve (6) of the surface of the valve core wear, causing the valve core in the body movement difficulty, 11 built-in one-way valve closed lax or surface of valve body fit clearance is too large. About cutting machine control system causes of failure is a simple introduction for you here today. When this happens, can according to the article explains the content of the actual operation, try to avoid this problem, a problem after to take measures to prevent, as soon as possible to better ensure the operation of equipment.









CNC cutting machine cutting machine operation is easy