CNC CNC engraving machine is widely used, but after failure problem, make a lot of customers to do.
In general CNC CNC engraving machine spindle accessories such as there is no problem for the most part engraving machine damage due to improper operation, so learning how to control CNC CNC engraving machine is a top priority, in fact many reasons as long as familiar with after carving machine, can quickly determine the cause of the problem.
1, spindle will not operate properly, first check the inverter LED display shows the error code (
See the inverter specification error code)
2, one of three axis shaft can't move, this time to check the corresponding shaft of the drive block is damaged.
Check method can use substitution method, will not move under the shaft of the aviation plug in other active on the shaft of the drive.
3, if the fixed axis after exchange ambulate normally, can show that the shaft of the drive has been damaged, need to change a good drive block, if still won't do that cable fixed axis or replace defective cable or motor.
Three axis are not active, now have check the three-axis air plug and connect control box, power control box is opened, whether the data line and control box and control card connected to the PC host.
If the above all, please contact carving factory.
Carved from processing in principle is a combination of drilling and milling processing, carving machine a variety of data input mode according to the need.
Computer engraving machine is laser engraving and mechanical engraving, these two types have high power and small power.
Because of engraving machine has a very wide range of application scope, so it is necessary to understand the most appropriate range of application of various kinds of engraving machine.
Small power only suitable for double color plate, building model, small signs, three-dimensional crafts, etc. , due to the small power greatly influence the scope of its application.
High power small power engraving machine engraving machine can do things, the most suitable for large cutting, embossing, engraving.