CNC engraving machine operation originally is so complex that you learned?

Preparation according to the needs of customers for typesetting, good full path calculation, generate different tool path and save the file; Open the path to the file in the control system, fixed materials, a good job of the origin, the improved spindle motor adjustable number, after completion of all right, can be connected to the power supply, the operation of the machine. Machine operation to open the power switch, power indicator light is lit, the machine will be reset run self-checking, X, Y, Z three axis will automatically back to zero, then run to the origin; Use the manual controller, respectively for X, Y, Z axis adjustment, aimed at processing origin, adjust the appropriate speed, feed rate, the carving machine came into work waiting state. Carving work will be edited file transfer to the engraving machine, carving machine carved work completion. After carving, carving the opportunity to automatically carry knives, and run to work just above the starting point. Engraving machine operation safety precautions before carving and sculpture to check water pump motor and oil pump, whether a failure; Always clean up debris, debris, etc. Clamping workpiece, follow the 'outfit, outfit, outfit is' the principle of not dangling sculpture; Tool pack card is, must first card within the screwing in lock nut founder, loaded on the motor shaft together, then insert the tool card first, then slowly lock nut;