CNC engraving machine equipped with transfer jig

CNC engraving machine machine can be carved on the cylinder, cone surface, plane all kinds of text, curve and pattern. Single CNC engraving machine cost is high, the machining efficiency is not high. Using multi-station fixture can greatly improve the efficiency of engraving, but transfer the biggest problem is that each artifact due to processing and manufacturing, size, tolerance can't completely consistent.
in the moment of the cylinder and the text, for example, the groove depth in commonly 0. 02 ~ 0. 5 mm, if there is error on the workpiece in diameter ( General error is 0. 01 ~ 0. 05mm ) , then engraved lines will be two-tone, even in some places can't carve the cylindricity error, if any, to center on one side of the groove depth is deeper, deviate from the center of the circle side may not shallow or moment, unable to meet processing requirements. Carved on the surface of the flat, tapered, too, have the above problems. To solve this problem, especially in high precision carving, such as scale carved on the instrument must be the use of special carving knife device.
engraving machine price information in the numerical control network.