CNC carving and milling machine tool processing wood surface decorative patterns

Check for CNC carving and milling machine and cleaning machine tool working platform, right on the CNC carving and milling machine tool clamping wooden door, installation tools, set up for processing the workpiece origin. According to design and edit beforehand good processing procedure for automatic processing, process should pay attention to the size of the sculpture design and size is correct, because the setting of the workpiece origin is visual, and design of the products processing size will have certain error. Pay attention to the processing according to the wood material set of machine tool spindle speed and feed speed, so as not to work out the goods does not guarantee the accuracy and surface roughness. The wood surface processing tool commonly used linear decorative pattern shall be 6 mm round bottom knife, carving depth with 3 mm advisable. Machine parameter is set to: spindle speed 20000 r/min, the feed rate value should be 20% ~ 30% of the machine tool. Carve patterns or designs on woodwork wood surface processing diagram as shown in figure 1.

figure 1 wood surface of carve patterns or designs on woodwork processing sketch
engraving machine price information in the numerical control network.