- carving machine model work - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

CNC machinery co. , LTD. , integrating research, development, manufacture various types of woodworking advertising engraving machine | jade stone carving machine | | metal mold engraving machine series of optical fiber laser five-axis robot | | styrofoam CNC mortise and tenon joint processing center production line | | customize household etc. Various kinds of CNC engraving machine series, just take a look at below small make up of the selected model of engraving machine work related information, hope to be of service, welcome to inquire!

if woodworking engraving machine maintenance work done well, can very good running condition that assures ambry door engraving machine, engraving machine running stability is cupboard door, processing speed and processing accuracy, to be able to get good protection. But if the wood carving machine cloth to do maintenance and maintenance, so the early may fix it several times, but later the problem will be more and more, repaired here and there is a problem, this is because the woodworking engraving machine door one or several parts of the loss is more serious, will affect the normal work of the other parts, less maintenance, forced to wear and tear parts will be, the more the running of the whole machine is more problematic. How do cabinet door engraving machine maintenance?

1, ensure safely ambient temperature, pay special attention to the preparation temperature in winter. Woodworking engraving machine cabinet door at room temperature, best at least workers don't feel very cold. Check the oil standard applicable temperature, at least minimum temperature. Machines need not when, if the room temperature low best poured out the water in the tank, to prevent the frost crack water tank and the water pipe. The effects of temperature on carving machine cabinet door is not very big, but due to many clients to screw with butter, winter also forget to clean up, each boot operation does not open, some workshop temperature is very low, although the oil, can still frozen, the machine running. Preparation of humidity cannot too big, otherwise the electrical accessories of the machine is easy to loss 5. Preparation of electromagnetic interference is important to note that there's too much static words are easy to make the cabinet door engraving machine processing precision affected followed by clean-up.

2, woodworking carving machine after use, must pay attention to clean up the table and exposed the dust on the electrical accessories, wood chips, etc. , including the guide rail and slide block machine, including machine screw and spindle motor. Including industrial control box machine, especially in the industrial control box dust slightly more problem will lead to a circuit board operation, it is easy to appear the breakpoint, run, and so on and so forth.

3, regular cleaning case dust, with air spray gun and xiaomao brush regular cleaning, the card out of the dust caused by too much labor. Pay attention to the case of the cooling device, especially in the summer, be careful the line of control equipment, including high temperature burn out circuit board. Regular cleaning computer garbage and clean up disk fragmentation, and optimize the computer system, maintain the stability of computer system. Killing a computer virus regularly, but pay attention to the work can not open the antivirus, be careful.