Advantages of CO2 laser cutting machine

Advantages of CO2 laser cutting machine. CO2 laser cutting machine is a kind of can stable cutting carbon steel within 20 mm, less than 10 mm stainless steel, 8 mm aluminum alloy under the laser cutting machine. For CO2 laser wavelength is 10. 6 um, more easily absorbed by nonmetal, can high quality cutting wood, acrylic, non-metallic materials such as PP, organic glass, but the CO2 laser photoelectric conversion rate is only about 10%. CO2 laser cutting machine in the beam exit with a blowing oxygen, compressed air or inert gas N2 nozzle, used to improve the cutting speed and incision of the flat is bright and clean. In order to improve the stability of the power and life expectancy, for CO2 gas laser to solve the high power laser discharge stability. According to the international safety standard, laser hazards are rated level 4, CO2 laser belongs to harm a small level. Main advantages: big power, average power in the 2000 - 4000 w, can cut 25 mm less than the full size of stainless steel, carbon steel and so on conventional materials, and less than 4 mm aluminum plate and within 60 mm of acrylic board, wood board, PVC board, and quickly when cutting thin plate. In addition, due to the continuous laser, CO2 laser output is in the cutting, is the effect of cutting section of the three kinds of laser cutting machine smooth and good. Its main market orientation is 6 - In the 25 mm thick plate cutting processing, mainly for large and medium-sized enterprises and some of the pure external processing laser cutting processing enterprises, but because of its laser maintenance loss is big, host cannot overcome factors such as big power consumption, in recent years, the huge impact by optical fiber laser cutting machine, the market is in a state of obvious atrophy.