This machine is able to  cut metal and non-metal,it is mainly widely applied to those three aspects:

1. cut thick metal sheet with living focus system

2.engrave and cut nearly all kind of nonmetal materials

3. The cutting and engraving machine is able to cut Carbon steel and Stainless Steel.However,it is not able to cut and engrave other metals.

Notes:Traditional Common CO2 Laser cutting machine installs RDC6442S Control Card and RDworks control software.This machine installs RD6332M Control Card and Metal Cut software.They are different.

This machine has  7  advantages:

(1)Widely application. Not only nonmetal material but also two typical metal materials (carbon steel and stainless steel).

For carbon steel,its cutting depth is 2mm(150w)/3mm(180w)

For stainless steel,its cutting depth is 1.2mm(150w)/2mm(180w)

(2)High Precision.

This machine can  meet most customers' the need.

Its Min. Shaping Character is 1.5mm x 1.5mm for Chinese and 1.0mm x 1.0mm for English.

(3)Powerful output.

The power of this machine is 280w(you can choose 300w).The 280W laser means the deeper cutting depth and faster cutting speed.

(4)Not burn the leather or cloth

Although the laser tube is 280w,but the output laser can be adjusted by software.You can control the laser power on software and choose lower power to cut flammable leather or cloth.

(5)Support PC.It can support nearly all software runs in Microsoft Windows Systems.

(6)Environmental Friendly.

When the machine runs,there are no toxic substance released.In addition,the carbon emission is also low.

(7)Competitive Price.

Higher Performance Ratio is the target we always pursuing.Better Performance,Lower Price.

 All detailed parameters are as below:

 Standard parts are as below

Nearly 80%-90% products are transported by sea.

The packaging is international standard plywood box.It can be placed in the container.

If you need the machine urgently, we can handle it by air.

In addition,those machines can also be transported by land if you are from Russia,Kazakhstan,Vietnam,Laos,Hong Kong(China) and another special country or regions.

Our Company have enough experience for producing laser machine.

In the past ten years,quantities of customers came to visit our company and to purchase the products.

We devoted to offer customers a better service.

1.Which kind of after-service does your company offer?

Answer:Our company can provide you two after-service.Online support and video technical support. 

2.This machine looks complicate and intricate,can you teach me how to use?

Answer:Don't worry about it.We can provide you video technical support.We can stay in touch via whatsapp,email and other communication software.

3.Is it the machine able to install a autofeeding worktable?

Answer:The auto-feeding worktable is made of aluminum which can be cut too.If you have a larger size of material to be cut or be engraved,try to contact us to customer a machine with larger working area.

4.Is the machine able to cut non-metal material?

Answer:Of course yes.It is mixed laser cutting machine,both metal and nonmetal.You can switch the working mode.

5. I need the machine urgently,can the machine transported by air?
Answer:Yes,it can.You can contact us and we will send you a CIF Price quotation to you.The cost and insurance are included.

6. How long the laser tube is working well?
Answer:It is about 10000 hours,but it is also depend on your work and maintain.

7. I have heard the mirrors need cleaning?
Answer:Yes they do but not after every job, once a week is normally enough

8. I think this machine is well,how can I purchase it?

Answer:Look at the top right corner of this page.And click the "contact supplier".